The wheels are used |for front lifting, and the locomotive type number is 71.3296.1
A hub is a cylindrical, barrel-shaped metal component centered on an axle that supports the tire's inner rim. Also called ring, steel ring, wheel, tire bell. Wheel hub according to the diameter, width, molding methods, materials of different kinds.
Brake cylinders are used for TERBERG model number T22038011
1. The brake cylinder, also known as the master cylinder, is the operating rod of the brake pedal or brake device. It is mainly composed of gas column, piston, gasket, oil tank, oil flow device and so on.
2. The main parts of the cylinder are cylinder head, cylinder head, cylinder, piston, piston rod, guide sleeve, seal and pull rod.
Expansion tank part No. T12013488
1. The system constant pressure, such as the system water shortage, that is, when the pressure is reduced, the expansion tank will automatically water to the system, on the contrary, if the system pressure increases, the expansion tank can automatically eliminate excess water until the pressure is balanced.
2. Remove air from the system.
Air conditioning compressor is used in TAD 851 VE engine, the compressor model is 82436934
1. The air conditioning compressor plays the role of compressing the driving refrigerant in the air conditioning refrigerant circuit.
2. Air conditioning compressors are generally installed in outdoor units. The air conditioning compressor extracts the refrigerant from the low-pressure area, compresses it, and sends it to the high-pressure area for cooling and condensation. It dissipates heat into the air through the radiator. The refrigerant also changes from gaseous to liquid, and the pressure increases.
3. As the air conditioner compressor continues to work, it continuously absorbs heat from one end of the low-pressure area into the refrigerant and then sends it to the high-pressure area for dissipation into the air, thereby regulating the temperature.
The fan is used for Konecranes SMV6/7ECC90 model part number 53330371
For Reach stacker
DRG420-450/DRF400-450/DRT450
Sany Reach Stacker Port Machinery Container Handling Equipment Parts
Volve or Cummins Engine, 334HP
Max Hosting Hieght: 15100mm (49′ 6″)
Reach Stacker
Evaporator for MCC: N21-0024 model part No. 924530.0181
(1) Evaporator for cooling liquid refrigerant. Used to cool liquid carrier coolants - water, brine or glycol solution. This type of evaporator commonly used are horizontal evaporator, vertical tube evaporator and spiral tube evaporator.
(2) evaporator for cooling air. This type of evaporator has a cooling tube and a cooling fan.
The shift handle is used for kalmar DCG330-12,DCU80 series model number 920930.0057
Shift handle (also known as transmission handle) is an important part of the automobile transmission system, mainly used to control the shifting operation of the automobile. In a traditional mechanical transmission, the shift handle transmits the shift operation to the gear mechanism inside the transmission through the connecting rod, thus achieving the switch of different gears. The principle of the shift handle mainly includes the following aspects:
1. Connection of joystick and shift lever
2. Operate the transmission mechanism
3. Control of gear mechanism
Bolt Spring Assembly for Kalmar DRF400-450 Models Part Number 923828.0369
1. Screws on the commonly known as the teeth of the big name of the thread; screws with threads on the part of the screw; for the use of screwdrivers or wrenches to turn the screws to tighten or loosen the big head for the screws (screws) head; for use in conjunction with the machine screws, the middle of the hole with threads, screwed in the screws on the east to be called the screw cap (nut). The use of wood screws (generally used in woodworking, thread distance is wide, with a pointed), self-tapping screws (mostly used to connect wood, plastic or metal sheet, etc.) are not required to use the nut.
2. Screws on the commonly known as the teeth of the big name of the thread; screws with threads on the part of the screw; for the use of screwdrivers or wrenches to turn the screws to tighten or loosen the big head for the screws (screws) head; for use with the machine screws.
The steering machine is used for Kalmar DCE80,DCT80 model number 920207.028
The structure of the steering machine The steering machine refers to the mechanism set up in order to change the direction of the wheel. It consists of three parts, namely, steering mechanism, power mechanism and steering knuckle.
The steering mechanism is composed of main reduction gear, pinion gear, auxiliary reduction gear, shifting fork, connecting rod, etc. The main reduction gear is a part of the synthesis gear by the steering handwheel, which drives the main reduction gear to rotate, and the pinion drives the auxiliary reduction gear to rotate through the coordinate transmission, and then changes the direction of the wheel.
Tow chain for Elme model number 781956
Material:The use of high and light wear-resistant materials, alloy copper for the shaft pin to provide the product wear strength, bending more flexible, less resistance and reduce noise, so as to ensure long-term use without deformation
Resistance: oil resistance, salt resistance, and a certain acid resistance, alkali resistance.
Valve for Konecranes model Part No. 6055.224
Make/Model: PARKER/ Parker /6055.006
Material: Cast iron
Nominal pressure: 230 (MPa) MPa
Link form: thread
Drive mode: electromagnetic
Form: plunger type
Camera for SICK Vehicle Part No. LMS111-10100-copy
Type: Laser Scanner Sensor
Scanning mode: infrared (905 nm)
Scanning range: 0.5m-20m
Supply voltage: 10.8V DC.... .30V DC
Enclosure protection class: IP67 (EN 60529, section 14.2.7)